Wuxi Liguo Machinery Manufacturing Co., LTD

Vertical and horizontal tube and rod straightening machine, Coil straightening cutting machine!

Home > Exhibition > Content
Operation steps and driving requirements of steel pipe straightening machine
- Jul 31, 2018 -

The steel pipe straightening machine effectively adopts its vertical configuration and two-way driving. The transmission torque of the whole equipment is large and the straightening quality is high. The roller changing of the steel straightening machine is convenient and easy to bite. Suitable for online continuous operations. Durable and durable, the hole type is the most advanced elliptical translation curve in the straightening machine industry. The surface of the material to be corrected is guaranteed to have no defects such as spiral indentation and scratching. And can improve the ellipticity of the section.

Steel pipe straightening machine steps

1. Before the steel tube straightening machine is turned on, it is necessary to effectively check whether the hydraulic oil of the hydraulic station, the reduction gear box, and the gear oil of the transmission box are full.

2. Before starting the main motor, it is necessary to adjust the corner angle and adjust the working pressure of the hydraulic system.

3. The steel pipe straightening machine needs to inject lubricating oil at each lubrication point, and effectively check the operation condition of the mechanical transmission part to make it flexible to transport.

4. The operator wears the labor insurance products, and must not leave the post or run the post after starting the machine.

5. After the oil temperature and oil pressure of the hydraulic station have stabilized, the upper straightening roller is raised to the initial position.

6. Manually receiving the material, sending the steel pipe through the third pair of straightening rolls and then clamping the upper straightening rolls.