Wuxi Liguo Machinery Manufacturing Co., LTD

Vertical and horizontal tube and rod straightening machine, Coil straightening cutting machine!

Home > Exhibition > Content
Sheet metal decoiler stability and stiffness requirements
- Sep 15, 2018 -

The sheet metal decoiler is a welded box-shaped structure, and its variable frequency speed regulating motor effectively drives the reel shaft to provide the main power for the unwinding machine after decelerating through the gear box. The reel of the uncoiler is a hollow shaft supported by two bearings on the gear housing with a transmission spur gear mounted between the bearings. The gearbox is lubricated by forced lubrication and is equipped with two constant speed motors for the closed loop oil lubrication system. The mandrel is a cantilever structure whose front end is supported by an outer support bearing during unwinding to maintain the rigidity and stability of the uncoiler.

The mandrel of the sheet metal decoiler is connected to four sector plates by inclined dovetail grooves on four end faces, and each of the sector plates is prevented from axially swaying at the trailing end by a radial slide when operating, but To some extent, the expansion and contraction in the radial direction is achieved. A rotary oil cylinder is connected to the end of the reel shaft, and the cylinder piston rod drives the front end quadrangular axis to axially slide through the rod at the center of the reel shaft, thereby driving the fan plate to radially expand and contract.

The roll of the sheet metal unwinder can be increased by the additional four sector plates to increase the nominal diameter. The uncoiler frame can be moved on the rails of the base and driven by hydraulic cylinders for central position control. In order to enhance the stability of the reel, a support arm device is designed on the head of the reel. When there is a steel coil on the reel, the support arm is driven by the oil cylinder to support the reel head, and the support arm is normally retracted without affecting. The coil is rolled up.

http://www.lgjx-straightener.com/