Wuxi Liguo Machinery Manufacturing Co., LTD

Vertical and horizontal tube and rod straightening machine, Coil straightening cutting machine!

Home > Exhibition > Content
Steel Cold Rolling Mill Can Be More Efficient Operation
- Sep 12, 2017 -

As a steel cold rolling mill users, I believe we all hope that the use of the equipment to roll out a more beautiful and better quality products. If you want to achieve this goal, then we must ensure that the operating method used is appropriate and reasonable. In fact, if the operation method is not correct, not only will affect the work efficiency of steel cold rolling mill, but also there is a certain risk.

 Steel cold rolling mill.jpg

In other words, only to ensure that the operation is correct, can be as much as possible to reduce the failure rate of equipment, but also can better play the role of steel cold rolling mill and value, but also can effectively extend the service life of the device. In short, for the user, it is very worthwhile. So, what kind of operation can be called a reasonable method of operation?

 

In response to this problem, we need to combine the actual work to illustrate. As the steel cold rolling mill in the course of the operation, especially in the non-stop cleaning operations, it is likely to lead to rolling between the two rollers. Therefore, in the course of our work, we need to take appropriate protective measures to avoid such dangerous stories. And in the clean-up operation, it should insist on shutting down the equipment before they can be carried out.

 

In daily work, the staff should also regularly check the steel cold rolling mill transmission parts, not only to see if the connection is fast and good, but also should do lubrication care. In addition, appropriate insulation and sound insulation measures should be taken in the control room and cab of the equipment to avoid distracting the operator's attention.

 

In addition, in order to ensure the safety of the work as much as possible, we also need in the steel cold rolling mill and coiler between the conveyor roller set on both sides of the height of not less than 0.3m fence. But also to ensure that the equipment can be in the role of strip under the effect of full stop.


If you are interested in our products, please contact us for more information.
Wuxi Liguo Machinery Manufacturing Co., LTD.
Add:hong seven hills room bridge industrial park Xinwu District,WuxiCity,Jiangsu Province
Contact: Lu Ziyu
Ph:+86-13921123331
Tel:+86-510-88580435
Fax:+86-510-88586008
E-mail:luziyu82@126.com
Website:http://www.lgjx-straightener.com