Theround bar straightening machine has high stability and simple operation. In the actual operation, not only straightening can be performed, but also the suede and polishing can be completed in one time, which is not only environmentally friendly, but also saves time and effort. The equipment can adjust the cutting depth and processing speed according to the actual pipe fitting requirements. It also has low noise and can handle at least 8 meters of round steel material per hour.

For the user, theround bar straightening machine can perform straightening work continuously for a long time, and the failure rate is low, and the maintenance is simple, as long as it is usually clean and tidy. Debug the parts of the equipment every quarter and apply oil to the bearing parts.

It should be noted that in the process of straightening the pipe by theround bar straightening machine, it is necessary to observe the straightness of the steel pipe in advance, and ensure that the steel pipe is in contact with three-quarters of the straightening roller body during the initial adjustment, and the gap is not ensured. More than 0.1mm. The straightening speed is reasonably adjusted according to the degree of bending of the steel pipe and the material of the steel pipe to be straightened. It is also necessary to adjust the distance between the upper and lower rolls according to the material of the steel pipe, the degree of bending and the required accuracy to ensure the straightening reduction.

http://www.lgjx-straightener.com