Wuxi Liguo Machinery Manufacturing Co., LTD

Vertical and horizontal tube and rod straightening machine, Coil straightening cutting machine!

Home > Exhibition > Content
The role of the steel coil uncoiler machineand its various components
- Feb 02, 2019 -

The steel coil uncoiler machineis a special equipment for metal sheet leveling. It is used for leveling steel plates and uneven boards. It can be used to form unwinding, leveling, shearing production lines and other sheet metal production lines according to relevant configurations. It is suitable for machinery, vehicles and metal products. Household appliances, steel structure, decoration and other industries.


One of the functions of the steel coil uncoiler machineis to support the coil by tightening the inner hole of the coil; the other is to feed the head of the strip into the leveler by the rotation of the straight machine. Therefore, the performance of the uncoiler is critical to the impact of the entire production line. In the years of design practice, the uncoiler structure has been continuously optimized and improved, and the performance of the uncoiler has been improved.


The steel coil uncoiler machinespindle has two functions, one is to drive the coil to rotate; the other is the tension support of the coil. The realization of the tension is usually accomplished by pushing the inclined block with the cylinder or cylinder mounted with the main shaft. The small unit uses more cylinders and the large unit uses more cylinders. The realization of rotation is usually achieved by the motor rotating the main shaft through the reducer. of.


The coil unwinding machine body is a welded box-shaped structure, and the variable frequency speed regulating motor drives the reel shaft to reduce the main shaft by the gear box. The gearbox is lubricated by forced lubrication and is equipped with two constant speed motors for the closed loop oil lubrication system. The mandrel is a cantilever structure whose front end is supported by an outer support bearing during unwinding to maintain the rigidity and stability of the uncoiler.