Wuxi Liguo Machinery Manufacturing Co., LTD

Vertical and horizontal tube and rod straightening machine, Coil straightening cutting machine!

Home > Exhibition > Content
Tube straightening machine online continuous operation requirements
- Mar 22, 2018 -

The tube straightener adopts its vertical configuration and two-way driving during the production process. The whole equipment has large transmission torque and high straightening quality. The tube straightening machine has convenient roll change and is easy to bite into. Suitable for on-line continuous operation The entire device is wear-resistant and durable. The hole type is the most advanced elliptical translation curve in the leveler industry. Ensure that the surface of the material to be straightened is free from defects such as spiral indentation and scratches. And can improve the ellipticity of the section.

The pipe straightening machine can effectively straighten the bars, pipes, metal profiles, wires and other equipment. The equipment can effectively squeeze the bars and the like through its leveling rollers to change the straightness. There are two rows of straightening rolls, varying in number.

Pipe straightening machine operation steps

1. The tube leveler needs to effectively check whether the hydraulic oil of the hydraulic station, the reduction gear box, and the gear oil of the transmission box are full before starting the machine.

2. Before the start of the main motor of the tube straightening machine, adjust the angle check and adjust the working pressure of the hydraulic system.

3. Inject lubrication oil at each lubrication point and check the operating status of the mechanical transmission to make it flexible.

4. The operator of the tube straightening machine wears labor insurance products and must not leave the post or post on the post.

5. After the oil temperature and oil pressure in the hydraulic station have stabilized, the upper leveling roller is lifted to the initial position.

6. Manually receive the material, and send the steel pipe through the third pair of leveling rollers and press the lower leveling roller to clamp down.