Wuxi Liguo Machinery Manufacturing Co., LTD

Vertical and horizontal tube and rod straightening machine, Coil straightening cutting machine!

Home > News > Content
The Type Division And Operation Preparation Of The Profiled Straightening Machine
- Nov 14, 2017 -

The profiled straightening machine is mainly used in U-steel, square steel, angle steel, round steel, rail, and I-beam and other sections.


The profiled straightening machine can be divided into constant pitch straightening machine and variable pitch straightening machine according to the change of pitch. According to the arrangement of roll forming, it can be divided into the double crusher section straightening machine and the roll staggering section straightening machine. If according to the form of placement, it can be divided into vertical and horizontal straightening machine. If according to the function of straightening machine, it can be divided into the pressure section straightening machine, aluminum section double crusher straightening machine, roll-type section straightening machine and circular section straightening cross roll straightening machine.


The preparation work before operating the profiled straightening machine

1.Before start up, the profiled straightening machine should check some important parts or components, such as the hydraulic oil of the hydraulic pressure station, reduction box, transmission case, and gear oil. Mainly check whether the components are normal, and whether the oil is filled. If there are problems, they should be dealt with in a timely manner.

2. Before the main motor of the section straightening machine is started, some adjustment work should be done, mainly including the angle check and adjustment, and the adjustment of the working pressure of the hydraulic system.

 3.Carry out some necessary lubrication work, mainly lubricating the lubrication part to ensure that lubrication is in place. In addition, check whether the operation of the mechanical transmission part of the equipment is flexible, and whether there are problems of jamming and so on. The operators of the section straightening machine should wear the labor protection articles to ensure their own and operation safety.

Previous: No Information

Next: Bar and tube straightening machine